Air through a filter and a proportional valve and a suction regulator, the main control valve for regulating the pressure chamber of the air cylinder, rotor, vane formation. Rotation of the rotor relative to the cylinder showed a minimal amount of loss eccentric operation, the valve mounted on the rotor slot, and slide pushed by centrifugal force to the cylinder wall, and efficient fuel injection system to ensure that the cooling and lubricant compressor, the cylinder a thin film formed on the walls can prevent direct contact angle between the metal parts and cause wear. During compression, between vane compressor rotor and the cylinder volume declining, oil and gas mixture by mechanical separation and filtration separation compressed, the compressed air in the oil content of less than 3PPM. Condensate is discharged after purification of compressed air into the radiator for cooling, the cooling of the formed condensation water separator drain area via electronic means.

1. Air filter                        5. rotor                              9. cooler                         13. The oil cooler inlet pipe     17 cooler

2. Automatic air inlet          6. The oil filter                    10. The oil separator         14. The outlet pipe               18. The fan

3. Oil System                      7. labyrinth return valve       11. The return valve          15. The intake pipe             19. The gas-water separator

4.The air pressure chamber   8. minimum pressure valve    12. The minimum pressure valve   16. The outlet pipe    20. The drain solenoid valve