Mattei intelligent compressor vane compressor is the best choice for upgrading:
More energy-efficient than screw GB19153 comprehensive energy-saving up to 30% of the value of an integrated
More reliable diamond movement, inexhaustible power 24H, 365D continuous operation using the best
Use of lower cost of maintenance costs ≤1 yuan / H
1. High reliability, long continuous operation
As a result of the rotary vane design, the rotor only one moving part, the speed up to 1000 rev / clock, high reliability during the operation itself, oil and exhaust temperature is low, can be placed under harsh environmental conditions, still work as usual, so reduce downtime, equal to save a lot of money you do not have to repair the rotor vane can permanently using it.
2. durable, long life
Always maintain a good performance, service life more than 100,000 hours, without replacing major metallic parts, low vane compressor speed, low wear, long life, high residual value.
3. excellent performance, high specific power
Vane compressor with advanced technology, high volumetric efficiency: users spend the same money, get more air. Slide itself automatically compensated by the centrifugal force and the stator cavity wall gap, almost no secondary compression of the situation, which is the screw compressor unparalleled.
4. Low maintenance, consumables include only prepare three kinds of oil, small oil capacity
Spare parts include: oil, oil core and air filter three kinds, air filter and oil every 2,000 hours to replace, oil core replacement every 10,000 hours, oil filter does not need to be replaced. Fuel efficient than other models, vane compressor run economy, in most cases, the models than other compressors could save maintenance costs.
5. saving energy
Energy-saving control device vane compressor with a standard, such as "automatic stop / On" and "Auto-load" power consumption to uninstall the runtime.
6. Low noise
Vane rotary vane compressor technology, particularly quiet operation. Due to the low noise, the compressor can be installed near the point of use - no need for expensive dedicated lines and compressor room, thereby greatly reducing installation costs. Discharge of compressed air temperature is only slightly higher than the ambient temperature 4 ~ 8 ℃, the only noise from the motor and cooling fan, and the rotor runs very quiet.
7. Transmission
Vane compressor from the compressor and motor maintenance-free drive shaft coupling Rao, no belt or overdrive gear, to avoid bias tension, the belt slip and break opportunity, it will not produce gear and bearing wear loss.
8. No fan motor
Vane compressor motor to drive the compressor and fan at the same time, reduce power consumption and fault opportunities.
9. No axial forces
When vane compressor operation only a simple rotary movement of the headstock from power, without the use of complex roller bearings. The screw air compressor because the spindle has a strong axial thrust, roller bearings must be used, but due to the high speed and radial thrust bearing so that after a period of time must be replaced periodically.
10. babbitt bearing
Vane compressors do babbitt bearing, long life, can ensure that the entire compressor work more than 100,000 hours without major repairs and replacement parts (filters and gaskets, except O-ring). The screw compressor using a plurality of roller bearings, since bearing wear, to be regularly replaced. While bearing vane compressor can never change.
11. fewer external control line
Vane compressor uses advanced patented technology, oil and gas pipeline to do within the body, peripheral control and less piping, almost no oil and gas leaks. The screw compressor range of oil and gas pipeline, the chances of oil spills leaks and pipeline squeeze so much in a small enclosure, maintenance is very convenient.
12. Use can be placed directly on the ground
Light weight vane compressors, such as 45 kilowatts L models only 956Kg, small dimensions, low center of gravity, the wheels can be made after welding mobility, and can be used at the site for mobile use, without complex pipelines.
13. The supply of high purity, good quality
Vane compressor discharge oil, less water, residual oil content of less than 2ppm, the exhaust gas temperature and ambient temperature difference within 10 ℃; and screw compressor exhaust oil content of about 3ppm, exhaust temperature and ambient temperature difference at 12 ℃ ~ 24 ℃.
Copyright: Hefei Anhui Ma Tai compressor limited liability company ICP 11005042 -1 technical support:Altitude network